RAMS 100;Remote Alarm Monitoring System for Un-interrupted Power Supply

Power Management

RAMS 100;Remote Alarm Monitoring System for Un-interrupted Power Supply

RAMS-100 is a Remote Alarm Monitoring System for the management of uninterrupted power supplies. It uses SNMPv2, complying with the standard RFC-1215, to generate the Alarms/Traps for Network Management Servers (NMSs). The RAMS-100 device uses Ethernet networks and offers support to Simple Network Time Protocol (SNTP) & Network Time Protocol (NTP).

The equipment is a compact unit to be connected to the Un-interrupted power supply for the collection of Alarm signals based on potential free contacts. The unit also provides two outputs to be connected to any terminal blocks to be used as per user applications.

Download Datasheet


Product Features
•	SNMP Agent embedded in the unit reads the information from the Un-interrupted power supply converts it into SNMP protocol and sends it to Network Management Servers
•	Generate traps for Network Management Servers on occurrence of Alarms from the Un-interrupted power supply
•	Configures Input/Output settings for Un-interrupted power supply on demand
•	Provides support for generic RFC-1215, supports SNTP v4 (RFC-2030) & NTP
•	Unit can be configured through TELNET or can be remotely configured using NMS Manager
•	Two outputs are provided through potential free relays which can be used for specific requirements of the user like starting of the generator set etc.)
•	RAMS-100 specific MIB file is provided for the interpretation of the SNMP messages
•	IEEE 802.3, 10/100 Base-T interface is provided to connect the unit to LAN/Internet cloud
•	RJ45 connector is provided for connecting the unit to the Un-interrupted power supply
•	Separate Dip Switch is provided for hardware settings of NO/NC condition for Input/Output
•	Input power supply 25V to 60V DC

Product Applications

Key Features

• SNMP Agent embedded in the unit reads the information from the Un-interrupted power supply converts it into SNMP protocol and sends it to Network
Management Servers
• Generate traps for Network Management Servers on occurrence of Alarms from the Un-interrupted power supply
• Configures Input/Output settings for Un-interrupted power supply on demand.
• Provides support for generic RFC-1215, supports SNTP v4 (RFC-2030) & NTP
• Unit can be configured through TELNET or can be remotely configured using NMS Manager
• Two outputs are provided through potential free relays which can be used for specific requirements of the user like starting of the generator set etc.
• RAMS-100 specific MIB file is provided for the interpretation of the SNMP messages.
• IEEE 802.3, 10/100 Base-T interface is provided to connect the unit to LAN/Internet cloud
• RJ45 connector is provided for connecting the unit to the Un-interrupted power supply.
• Separate Dip Switch is provided for hardware settings of NO/NC condition for Input/Output
• Input power supply 25V to 60V DC

Product List and General Technical Specifications

Specifications:
System interfaces
Ethernet interface
•	10/ 100 Base –T (RJ-45), IEEE 802.3, Half & Full Duplex.

RJ45 Interface/UN-INTERRUPTED POWER SUPPLY Interface
•	6-wires are used as input for ALARM conditions from Un-interrupted power supply.
•	Wire 1 is connected to NO/NC of inputs and Wire 2 is connected to common of inputs from Un-interrupted power supply /Power supply for Low Battery Alarm
•	Wire 3 is connected to NO/NC of inputs and Wire 4 is connected to common of inputs from Un-interrupted power supply /Power supply for AC power cut alarm
•	Wire 5 is connected to NO/NC of inputs and Wire 6 is connected to common of inputs from Un-interrupted power supply /Power supply for thermal overload alarm
•	2-wires are used as output fro Enable/Disable Alarm control
•	Wire 7 is connected to NO/NC for output and Wire 8 is connected to common of output to Un-interrupted power supply /Power supply

Output Potential free Contacts Output1 (PF1) & Output2 (PF2)
•	Used for Output signal for specific use by user
•	For Output1 Connector (Potential Free 1) 3 Pins are provided in the order NO, COMMON, NC
•	For Output2 Connector (Potential Free 2) 3 Pins are provided in the order NO, COMMON, NC

Package Contents
The Following items are included
•	RAMS-100 unit
•	MIB File in Compact Disk (CD)
•	User Manual

Ordering Information :

RAMS-100

	UPS
	Batteries
	Power Management
	RPS Series PoE Systems
	DC to AC Power Inverters
	RealLite